Images are representations only.

810-RAE-0020-C1G0A-9E

Series: Kayden CLASSIC 810 Thermal Flow, Level, Interface Switch & Transmitter Brand: Kayden Instruments

KAYDEN® CLASSIC® Thermal Flow, Level, Interface Switch, Modbus, 1" NPT, 2"U Length, 316 SST Sensor, Local Electronics Enclosure with Glass Lens Cover, Approvals: FM

Price

$1,504.00USD

Stock

In Stock 1 - 3 weeks

Quantity

Request Information

Specifications

Brand

Kayden Instruments

Accuracy

Flow Service: ± 1.0 % of Set Point Velocity over Operating Range of ± 28° C (± 50° F)
Level Service: ± 0.64 cm (0.25”)

Applications

Flow
Interface
Level

Approvals & Certifications

CRN - 316, 316L Stainless Steel - Canadian Registration Number 0F22124.2C: MWP 1990 psi, 13,720 kPa, 137 bar
CSA - Local (Sensor) Enclosure Flameproof: Class I, Div. 1, Groups B, C, D, Ex d IIB + H₂ AEx d IIB + H₂ (Class I, Zone 1, Group IIB + H₂) Temperature Code: T3 Enclosure Typical 4, IP55 Single Seal Approved Per ANSI/ISA 12.27.01-2003
CSA - Remote Electronics Enclosure - Optional Flameproof: Class I, Groups B, C, D, Ex d IIB + H₂ AEx d IIB + H₂ (Class I, Zone 1, Groups IIB + H₂) Temperature Code: T3
FM - Local (Sensor) Enclosure Flameproof: Class I, Div. 1, Groups B, C, D Temperature Codes: T2D (Ta=75° C), T3 (Ta=65° C) Class I, Zone 1, AEx d IIB + H₂ Enclosure Typical 4/IP55
FM - Remote Electronics Enclosure - Optional Flameproof: Class I, Div. 1, Groups B, C, D Temperature Codes: T2D (Ta=75° C), T3 (Ta=65° C) Class I, Zone 1, AEx d IIB + H₂ Enclosure Typical 4/IP55

Communication

Modbus RTU Communication-Alarms, Flow Status & Diagnostics
RS-485 Using Kayden's Remote Control & Monitoring Software (RCMS) or other Modbus Compatible Software

Cover - for Local Enclosure

Blind Cover - Flameproof
Glass Lens Cover - Flameproof

Electronics - Standard Features

*Configurable only from the Kayden RCM Software
100 % Digital Design. Electronics are Environmentally Sealed
4-Adjustable Independent Switch Point Timers
Automated Redundant Self-Test Diagnostics
Display Panel Lock-Out*
Easy Setup: No Mechanical Jumpers or Trim Pots
Incrementally Adjustable Heater Power (5 % Steps) with Automatic Over-Range Protection
Intelligent User Interface with Push-Button & Constant Display of Operation (Flow/Level)
Start-Up Bypass Timer
Temperature Compensation
Temperature Mode*: Process Temperature may be Displayed/Graphed in Flow/Level Mode

Enclosure Finish

Powder-Coated Polyester TGIC

Enclosure, Body Details

1” NPT Female Conduit Connection
Buna-N O-Ring on Cover

Enclosure, Body Material

Copper-Free Aluminum (Does Not Exceed 0.4 % Copper)

Environmental Protection

IP55
IP67
NEMA 4X

Input Power

12-24 Vdc, 120-240 Vac, 50/60 Hz
Power Consumption: Max.
Universal Power Input

Insertion 'U' Length

1.2” (3 cm)
12” (30 cm)
18” (46 cm)
2” (5 cm)
3” (7.5 cm)
4” (10.1 cm)
6” (15.2 cm)
9” (23 cm)
Custom 'U' Lengths 2.5” to 120” (6.4 cm to 305 cm) Available in 1/2” (1.0 cm) Increments.

NPT Connection

1” NPT Male
1/2” NPT Male
1-1/2” NPT Male
1-1/4” NPT Male
2” NPT Male
3/4” NPT Male

Operating Pressure - Sensor

CRN - All Process Connections - 316/316L Stainless Steel - Canadian Registration Number: 0F22124.2C: MWP: 1990 psi
CSA - All Process Connections: MWP: 3481 psi (24 MPa)

Operating Temperature - Electronics

-55° to 65° C (-67° to 149° F)

Operating Temperature - Sensor

-55° to 200° C, (-67° to 392° F)

Output

4-20 mA (Thermal Signal, Scaleable) 120 Vac, Max.

Principle of Operation

Thermal, Calorimetric

Remote Control & Monitoring Software

Adjust Relay Modes
Adjust Set Points 1 & 2
Load or Save User Settings
Lock or Unlock the Display Panel to Protect the Settings
Many Other Adjustable Features
Modify Heater Settings to Optimize Response Time
Monitor Operating Status
Operated Via a Personal Computer Locally or from a Remote Control Center
Visualize the Actions of the Process Via the Graphical Display

Remote Electronics Enclosure & Cover

Blind Cover - Flameproof
Glass Lens Cover - Flameproof

Response Time

Approximately 0.5 to 30 seconds

Sensor, Probe Style

Insertion

Storage Temperature

Product Should be Stored in a Clean & Dry Environment between -30° & 60° C (-22° & 140° F)

Switch Point Range

Gases: 0.25 to 200 sfps, 0.08 to 60 SMPS - Standard Condition 21° C (70° F) at 14.7 psi (1 Atm)
Hydrocarbon-based Liquids: 0.01 to 5.0 FPS, 0.003 to 1.50 MPS
Water-based Liquids: 0.01 to 3.00 FPS, 0.003 to 0.9 MPS

Switch Type

SPDT Sealed Relay Contacts Rated @ 4 Amps Resistive 230 Vac or 30 Vdc, Max.

Wetted Materials

316, 316L Stainless Steel
All-Welded Construction
Hastelloy C-276
Titanium

Documentation

Data Sheets

Product Manuals

Application Considerations

Application Consideration - Kayden Process Conditions pdf 788 KB

Application Notes

Catalogs

Certifications & Approvals

Outline Drawings