504FTB Series In-Line Flow Meter

Brand: Kurz Instruments

The Series 504FTB in-line flow meter is designed for applications where flow disturbances or line size changes are not an issue.

The 504FTB is available in 10 models for inline sizes from 1/2" to 4" pipes.
Features
  • Ideal for process and specialty gases
  • Sensors resistant to dirt and corrosion
  • Supports HART, Profibus DP, and Modbus communication protocols
  • User-defined binary gas compositions or up to five multiple gas calibrations
  • Sensor lead length independent circuitry
  • Very low flow noise
  • High turndown ratio.
  • Sensors do not overheat at zero flow using a unique constant temperature control method and power limiting design
  • Supports HART, Profibus DP, and Modbus communication protocols
  • Zero velocity as a valid data point

Specifications

Accuracy

  • 12-bits
  • Flow Accuracy: ± [1 % of Reading + (A × 20 SFPM)] where A is the Flow Area of the 504FTB
  • Temperature Accuracy: ± [(0.5 % of Reading +1° C (1.8° F)] for Velocities Above 100 SFPM

Applications

  • Air Sampling
  • Compressed Air
  • Flow Calibration
  • Fuel Flow
  • Natural Gas Metering
  • NOx Control Using Ammonia
  • Process & Specialty Gases
  • Solvent & VOC Recovery

Approvals & Certifications

  • ATEX
  • CE
  • CSA Class I, Division 1 & 2
  • EMC
  • EN IEC 60079‐0, EN IEC 60079‐1, EN IEC 60079‐15
  • EPA Mandatory GHG Certification: 40 CFR 98.34(C)(1)
  • LVD
  • NAMUR NE43
  • PED
  • RoHS
  • TÜV Rheinland SIL1
  • WEEE

Communication

  • HART (v7 FSK)
  • PROFIBUS DP

Display

  • Backlit Display / Keypad

Enclosure Finish

  • Dual Chamber Polyester Powder-Coated Enclosure

Enclosure, Body Material

  • Aluminum
  • Polycarbonate

Environmental Protection

  • IP54
  • IP66
  • NEMA 4

Flange Material

  • 316L Stainless Steel

Flange Size - 1" (DN 25)

  • 1" (DN 25) - 150#
  • 1" (DN 25) - 300#

Flange Size - 1/2" (DN 15)

  • 1/2" (DN 15) - 150#
  • 1/2" (DN 15) - 300#

Flange Size - 1-1/2" (DN 40)

  • 1-1/2" (DN 40) - 150#
  • 1-1/2" (DN 40) - 300#

Flange Size - 2" (DN 50)

  • 2" (DN 50) - 150#
  • 2" (DN 50) - 300#

Flange Size - 2-1/2" (DN 65)

  • 2-1/2" (DN 65) - 150#
  • 2-1/2" (DN 65) - 300#

Flange Size - 3" (DN 80)

  • 3" (DN 80) - 150#
  • 3" (DN 80) - 300#

Flange Size - 3/4" (DN 20)

  • 3/4" (DN 20) - 150#
  • 3/4" (DN 20) - 300#

Flange Size - 4" (DN 100)

  • 4" (DN 100) - 150#
  • 4" (DN 100) - 300#

Input Power

  • 24 Vdc ± 10 %, 1 A, Maximum
  • 85-264 Vac 50/60 Hz, 24 W, Maximum

Loop Resistance

  • Maximum

Materials of Construction

  • Sensor Support & Flow Body: 316L Stainless Steel

NACE & NIST

  • NIST

NPT Connection

  • 1" NPT Male
  • 1/2" NPT Male
  • 1-1/2" NPT Male
  • 2" NPT Male
  • 3/4" NPT Male

Operating Temperature - Electronics

  • Integral Display: -25° to 65° C (-13° to 149° F)
  • Remote Aluminum Display: -40° to 65° C (-40° to 149° F)
  • Remote Polycarbonate Display: -25° to 50° C (-13° to 122° F)

Output

  • Two Optically-Isolated 4-20 mA Outputs

Power

  • Solid State Relays: Optically Isolated, 0.5 A, 24 Vac/dc, Maximum

Pressure Rating

  • Up to psig: 300 (barg: 20.68, kPa: 2068.43)

Process Temperature

  • -40° to 125° C (-40° to 257° F)

Range

  • Mass Flow Range: up to 4,000 scfm (6,240 NCMH) Depending on Model & Calibration Option

Repeatability

  • 0.25%

Resolution

  • 12-bits

Sensor, Probe Diameter

  • Sensor Flow Body: 3/8" to 4" (9.5 to 101.6 mm)

Sensor, Probe Material

  • C-276 Alloy All-Welded Sensor Construction

Time Constant

  • Process Temperature Time Constant: 8 seconds for Temperature Changes at 6,000 SFPM (Constant Velocity)
  • Velocity Time Constant: 1 second for Velocity Changes at 6,000 SFPM (Constant Temperature)

The 504FTB is ideal for high-pressure gas flow measurements.
  • Ideal for Process & Specialty Gases
  • Air Sampling
  • Compressed Air
  • Flow Calibration
  • Fuel Flow
  • Natural Gas Metering
  • NOx Control Using Ammonia
  • Process & Specialty Gases
  • Solvent & VOC Recovery

Show More